Last modified November 8, 2024

FAQ & Troubleshooting

Discover answers to frequently asked questions and troubleshooting guides for JetBackup.

Frequently Asked Questions (FAQ)

What is the fastest backup destination method?

The fastest backup destination will be the Local storage (provided that it's on a separate device).

For best performance, it is also recommended to exclude files/folders, and disable backup for suspended accounts.

How do I improve my Backup/Restore performance?

If you're experiencing poor performance during your backup/restore procedures, consider adjusting the concurrent tasks setting through Settings->Performance section. This feature allows you to adjust the number of backup or restore tasks performed simultaneously. Please note that simply increasing this value may not guarantee faster performance. External factors such as rate-limiting by your storage provider could influence the speed of these processes.

Additionally, you may want to consider the geographic distance between the source server and the destination server. The greater the distance, the more likely factors like high latency, packet loss, and other elements may affect the backup/restore performance.

In some cases, such as SSH destinations where root access is not under your control, configuring the Concurrent Tasks to a range of 1-2 may increase speed in the backup and restore process.

Does JetBackup provide backup storage?

JetBackup is a backup management software that allows you to choose your own backup destination storage. It does not however provide or come with its own storage space. Click on Destination Overview for a list of all supported destinations.

Why are my backups marked as damaged?

If any issues are discovered during the integrity check of the backups, JetBackup will label those snapshot(s) as "Damaged". This indicates that one or more items in the selected backup are corrupted or did not transfer properly during backup and attempting to restore the account with these "Damaged" backups may result in unexpected errors/failures.

How to Verify if Backups are Marked as "Damaged"

To determine if the backups are damaged, we must first run the Integrity Check. You may run the Integrity Check process manually by executing the command below.

jetbackup5api -F runIntegrityCheck

If the Integrity Check finds any issues with the backups, it will mark them as "Damaged". Below are several methods to verify whether the backups have been labeled as "Damaged"

In the terminal, use the grep command to filter "found to be damaged" in the Integrity Check log files. The Integrity Check log files will be prefixed 64_LOGID.log

grep -Rn 'found to be damaged' /usr/local/jetapps/var/log/jetbackup5/queue/

Utilize the JetBackup API to execute the following command, listing all backups for an account that matches the specified Backup Type/Contains. Any damaged backup will be indicated as Damaged: 1 in the result.

jetbackup5api -F listBackupForTypeName -D "type=1&contains=511&account_id={$ACCOUNT_ID}&name={USERNAME}"

_id: 663e892e0490bd0d35025a15
    parent_id: 663e89260490bd0d350259d5
    account_id: 663675ba98c5c818fd0b34d3
    destination: 663e7f7d0f17de7b54086f22
    destination_name: localv2
    name: demo1
    created: 2024-05-10T20:52:54+00:00
    path:
    backup_type: 1
    backup_contains: 511
    account: demo1
    account_data:
      _id: 663675ba98c5c818fd0b34d3
      username: demo1
      owner: admin
      owner_id: 663675b998c5c818fd0b34d2
      package: undefined
      suspended:
      reseller:
      root:
    size: 281996
    params:
    backup_structure: 1
    notes:
    location:
    safety:
    deleted:
    lock:
    lock_ttl:
    damaged: 1 <<< Backup is damaged
    disabled:
    schedules:
      0: 8
    hidden:
    encrypted:
    encryption_id:
    encryption_key_required:
    encryption_key_exists: 1

Can I manually move my backups?

We don't recommend manually relocating backups to another destination/path because backups may have a different format between destination types or cause unintended conflicts when JetBackup expects the original path when reindexing and lead to corrupted backups.

How to Manually Restore an account from SSH/Local destinations

NOTE: These instructions only apply for backups stored in SSH(Legacy) and Local(Legacy) destinations that utilizes file-level storage. For backups stored in S3 Compatible | SSH/SFTP (SSHv2) | Localv2 Destinations, please use the JetBackup 5 Restore Interface.

The steps to manually create a compressed archive in SSH/Local destinations that can be used with jetbackup5 CLI commands is listed below:

Find the account path on the storage destination, ie /path/to/backup/{USER}_{UUID}/snap.1

[root@server {USER}_617969f43c597a40442a3391]# ll
drwx------. 12 root root   4096 Dec 24 15:28 snap.1
drwx------. 12 root root   4096 Dec 24 15:00 snap.2

Copy only the contents of the snap.x folder to a new folder called backup/ in that same directory using cp -av snap.1/* ./backup. The new folder MUST be named backup/ in order for the restore to function properly.

[root@server snap.1]# ll
drwx------  2 root root   28 Nov 20 20:00 certificate
drwx------ 38 root root 4096 Nov 20 20:00 config
drwx------  2 root root    6 Nov 20 20:00 database
drwx------  2 root root    6 Nov 20 20:00 database_user
drwx------  2 root root   29 Nov 20 20:00 domain
drwx------  2 root root    6 Nov 20 20:00 ftp
drwx--x--x 13 root root 4096 Nov 17 19:29 homedir
drwx------  5 root root   53 Nov 20 20:00 jetbackup.configs
-rw-r--r--  1 root root 4281 Nov 20 20:00 jetbackup.index

# Output will be similar to the below:
‘snap.1/’ -> ‘./backup’
<snipped>
‘snap.1/config/{USER}123.tar.gz’ -> ‘./backup/config/{USER}.tar.gz’

Compress the entire ./backup directory you just created with tar -czvf jetbackup5-{USER}.tar.gz /path/to/store/archive .
Using your preferred method, transfer the backup to your other server that has JetBackup 5 installed.
Then, run jetbackup5 --restorepkg jetbackup5-{USER}.tar.gz -v to restore the backup with verbose output. The restore should be completed successfully on the new server.

# Output will be similar to the below:
[24/Dec/2021 15:48:31 +0000] [PID 2804] JetBackup Version: 5.2.5 Panel Version: cPanel 5.2.5 (EDGE)
[24/Dec/2021 15:48:31 +0000] [PID 2804] Starting restorepkg script
[24/Dec/2021 15:48:31 +0000] [PID 2804] Decompressing backup
[24/Dec/2021 15:48:31 +0000] [PID 2804] [DEBUG] Tar Command: tar -x -z  -f jetbackup-{USER}.tar.gz -C /usr/local/jetapps/usr/jetbackup5/workspace/restorepkg/16403609112vUcYw2e1
[24/Dec/2021 15:48:31 +0000] [PID 2804] Parsing index file
<snipped>
[24/Dec/2021 15:48:42 +0000] [PID 2804] Executing panel post restore
[24/Dec/2021 15:48:58 +0000] [PID 2804] Restore completed
Restore completed

Some useful links on this topic:
Single Account Restore & Download
DisasterRecovery

Can I delete backups directly from JetBackup?

The recommended options to delete backups are:

Set up the appropriate retentions and filters on your Backup Job(s) associated with the backups you prefer to delete as well as adjust your Manual/Orphan Backup TTL settings and let JetBackup execute its automatic cleanup.
Utlize the JetBackup API to delete backups specified by a set time range, backup job, or destination. Please note that some of the parameters for the deleteAccountSnapshots API are only available starting from a specified version.

Additionally, it is possible, though NOT RECOMMENDED, to manually delete backups directly at your destination. The backup job and account backup directories can be identified by their naming convention. Backup job directories include the backup type and structure followed by the backup job ID. Account backup directories include the account name followed by the account ID.

Once backups have been deleted manually the destination must be reindexed before JetBackup will reflect the change made at the destination. This can be done in 2 ways:

Reindexing the Destination via the JetBackup5 GUI
Execute the following command on your server terminal:

   jetbackup5api -F reindexDestination -D '_id={DESTINATION_ID}

{DESTINATION_ID} should be replaced with the ID of the destination being reindexed.

NOTE: For destinations that utilize the Object Storage format and JetBackup’s Propietary backup structure (All destinations excluding Local[Legacy]/SSH ), it is not possible to delete a single snapshot. Instead when manually removing the backups from the storage destination, all backups for an account must be deleted on the Destination/Bucket. More info on the differences between Object Storage and traditional file structures can be found HERE.

How to add External MongoDB Configuration

In order to add you own external MongoDB Configuration please edit the file located at /usr/local/jetapps/etc/jetbackup/config.inc and add the following fields:

define('MONGODB_PORT', '1234');
define('MONGODB_HOST', '1.1.1.1');
define('MONGODB_USER', 'user');
define('MONGODB_PASS', 'pass');
define('MONGODB_DATABASE', 'db');

Once the file has been saved, restart the mongod service using the following command:

/usr/bin/systemctl restart jetmongod

How does JetBackup Prioritize which tasks to run first?

There are 2 underlying priority systems at work in JetBackup 5, both of which works so that the lower the value, the higher its priority on the queue. The systems are as follows:

A. Account Type Restore Priority - For restore tasks at the backend, JetBackup 5 prioritizes account types and assigns an associated (hard-coded) priority value as such:

Admin Accounts: 1000
Reseller Accounts: 10000
User Accounts: 100000

This ensures that when there are multiple accounts queued for restore, the parent accounts (admin > reseller > user) are restored first before their corresponding child accounts. Please note that this system only affects the restore process.

B. Queue Priority Groups - This allows you to specify and group accounts by priority at the admin level, allowing you to finetune how JetBackup prioritizes tasks for each account. This can be reached by navigating to Settings > Performance Tab > Queue > Manage Queue Priority Groups Button.

When adding/modifying a queue priority group, you have the option to set priorities by the following tasks:

backup priority
restore priority
download priority

You also have the option to associate an Account Tag for a priority group.

Now with regards to assigning priorities to accounts, you can navigate to the Accounts page, select the desired account then click Manage Account. Once on the modify account page, you can either set the Account Queue Priority Group Override setting or assign an Account Tag with the associated queue priority group.

To set an example, let's say we have the following configured in JetBackup 5:

Queue Priority Groups with corresponding priority values

High - 10
Normal - 50
Low - 99

Accounts with assigned Queue Priority Groups

admin_acct1 - High
rslr_acct1 - Normal
rslr_acct2 - Low
usr_acct1 - Normal
usr_acct2 - Low

Here will be the priority values for each account on the following tasks:

Account	Restore	Backup & Download
admin_acct1	1010 (1st)	10 (1st)
rslr_acct1	10050 (2nd)	50 (2nd/3rd)
rslr_acct2	10099 (3rd)	99 (4th/5th)
usr_acct1	100050 (4th)	50 (2nd/3rd)
usr_acct2	100099 (5th)	99 (4th/5th)

Troubleshooting

The JetBackup 5 Services

One major change from JetBackup 4 to JetBackup 5 is the introduction of JetBackup 5 Daemons. All JetBackup 5 processes (backups/restores/downloads/etc) are handled via the following services:

jetbackup5d
- The jetbackup5d service is our main service which handles all queue processing, automated tasks, and display. Check its status using the following command:

/usr/bin/systemctl status jetbackup5d

jetmongod
- The jetmongod service is JetBackup's MongoDB service. This stores all information regarding the JetBackup Configuration. Check its status using the following command:

/usr/bin/systemctl status jetmongod

jetlighttpd
- The jetlighttpd service is only available on JetBackup 5 for Linux servers. This service generates the JetBackup 5 UI for Linux Systems that do not have a control panel. Check its status using the following command:

/usr/bin/systemctl status jetlighttpd

If you ever notice any issues/errors with these services it may be a good idea to restart the services. Please note that restarting either of these services will abort any Processing Queue Items. Restart the services using the following command:

/usr/bin/systemctl restart {jetbackup5d/jetmongod/jetlighttpd}

JetBackup 5 Supplemental Log Locations

JetBackup 5 stores supplemental logs on the server for many different processes. The JetBackup 5 Log directory can be located at /usr/local/jetapps/var/log/jetbackup5. From here, the log file structure is as follows:

/usr/local/jetapps/var/log/jetbackup5/
├── jetbackupapi.log
├── jetbackupd.log
└─── queue
    ├── #_{ID}
    │   └── {ITEMID}.log
    ├── #_{ID}.items
    └── #_{ID}.log

jetbackupapi.log
- The jetbackupapi.log contains the list of all jetbackup5api calls that were made via the terminal or GUI.
jetbackupd.log
- The jetbackupd.log is the log that contains information regarding the jetbackup5d service. Any errors on the service will appear here.
queue
- The queue log directory contains the logs for all Queue Items. The # indicates the Queue Type and the {ID} is the Log Item ID.

Characters to Avoid when naming Files and Folders

While JetBackup supports almost any characters for filenames (UTF-8), there are special characters/symbols that are generally best avoided as there are specific limitations across various filesystems and storage destinations which can cause unintended issues with your backups.

This list is not exhaustive and is meant to help determine and avoid errors regarding filenames and your backups.


# pound	% percent	& ampersand	{ left curly bracket
} right curly bracket	\ back slash	< left angle bracket	> right angle bracket
* asterisk	? question mark	/ forward slash	blank spaces
$ dollar sign	! exclamation point	' single quotes	" double quotes
: colon	@ at sign	+ plus sign	` backtick
\| pipe	= equal sign

File Permissions to Avoid

Some backup destinations may have issues with certain file permissions. e.g. Sticky Bits - in some cases, we have received reports of files with the sticky bit permission causing the following error: Error: rsync: [generator] failed to set permissions ... Inappropriate file type or format . In such cases, our recommendation is to set an appropriate permission for the problematic files.
NOTE: S3 Compatible Destinations are able to backup and preserve permissions and does not have any limitations with file permissions.*

A couple of examples of file permissions to avoid below
-rw---x--t
-rwsr-Sr-T

How To Secure Backup Storage

Prior to adding a destination to JetBackup, we advise securing the backup directory, so that only the allowed users can access that folder.

In order to do that, please connect to the destination via console/GUI, and make the directory in which you want to store your backups. For example:

mkdir [-p] /mnt/backup_vol/jetbackup

Then we advise securing that destination so only one user can access it's content (except root)

useradd <jetbackup>
chown jetbackup:jetbackup /mnt/backup_vol/jetbackup
chmod 700 /mnt/backup_vol/jetbackup

Right now, only users root and jetbackup can access this directory.

Please search online, how to secure a backup folder for your particular file system (EXT, NTFS, FAT, etc..) on your system (Windows, Linux, macOS, BSD, etc..)

For more information, and a good start point please visit File System Permissions

Some useful links on this topic:
Linux Users and Groups
Windows - Set File Folder Permissions

Now, when adding that destination in JetBackup GUI, the specified Backup Directory should be the directory you have just created and secured: ie /mnt/backup_vol/jetbackup

Can I use NFS for backup storage?

Yes, you may use NFS v3 or v4.1 mounted on a directory in your server and configure it as a Local destination.

Please note that custom NFS/Mount configurations can cause issues with JetBackup. Due to the many custom NFS/mount configurations available, we only provide support for NFS v3 or v4.1 mounted with default options.

NOTE: JetBackup utilizes rsync when backing up to an NFS destination. Ensure your version of NFS has full support for rsync.

I terminated an account and the backup has been deleted. How can I restore it?

Jetbackup will store the backups for a deleted account as an Orphan under “Accounts -> View Orphan Accounts”. These backups by default will be stored for 180 days unless the setting is changed under “Settings -> General -> Delete Orphan Backups”.

There is no valid destination assigned to this backup job/Local and Remote verification id doesn't match

If you receive the following error when running a backup job:

Backup job "BackupJob_NAME" (#63938921012871b09d045862) has been aborted due to the following error: There is no valid destination assigned to this backup job

and the logs display:

[ERROR] Destination "Local": Local and Remote verification id doesn't match. Looks like there is a conflict between local and remote data. Please reindex this destination then try to run this backup job again

To resolve this, reindex the affected destination.

Can't Connect to SSH Destination

If you are able to login to the destination server via SSH and recieve this message

Could not chdir to home directory /PATH/TO/HOME/DIRECTORY: No such file or directory

then check if the SSH user has a valid home directory. The SSH user MUST have a home directory so that JetBackup can connect to the SSH destination.

Clone Jobs are not updating account packages.

By default, the initial clone for each account will be assigned its corresponding original package to its clone destination. If the package changes for an account on the source server, the account on the clone destination will remain on its old package. To ensure that the packages for accounts on the clone destination is updated properly, kindly set the Restore package selection on the Clone server from "Live Account Package" to "Backed up package".

cPanel

Why can't I restore a suspended account in cPanel/WHM?

You may encounter the following errors when restoring an account in JetBackup:

[ERROR] Error while trying to get data from uapi. Error: Failed to parse adminbin request: Account is suspended at /usr/local/cpanel/Cpanel/AdminBin/Server.pm line 101.

Error while trying to get data from uapi. Error: Could not remove entries belonging to “[email protected]” from the “testaccount” Horde database., Failed to parse adminbin request: Account is suspended at /usr/local/cpanel/Cpanel/AdminBin/Server.pm line 101.

cPanel/WHM restricts many API commands for an account when the account is suspended, including those used by JetBackup for restore. These errors indicate that a restore is failing because the account is currently suspended in cPanel/WHM.

To properly restore the account, please ensure the account is unsuspended in cPanel/WHM prior to queueing the restore in JetBackup. You can manage Suspended accounts in WHM via the "WHM -> Account Information -> List Suspended Accounts" interface. From this interface, you can also unsuspend an account.

List Suspended Accounts Documentation (cPanel/WHM)

How to restore accounts with unregistered domains?

WHM by default sets the Allow unregistered domains as disabled. This can cause the restore of accounts that have unregistered or expired domains to fail. This can be seen in the Restore Log as the following message: Please make sure that the domain is registered with a valid domain registrar.

In order restore the account, you can temporarily enable this setting by navigating to WHM -> Domains -> Allow unregistered domains and changing the value to on. Requeue the restore and once complete you may disable this setting again.

How to Lock Suspended Account's Backups

The following Bash script, based on the blog post JetBackup: Better Safe Than Sorry, allows you to automatically lock backups for a set number of days when an account gets suspended and subsequently unlocks when it gets unsuspended. When the script is triggered (via cPanel hooks), it subsequently locks LOCK_BACKUPS number of backups for a LOCK_PERIOD number of days.

Here are the steps to create the Bash script and register to the cPanel/WHM Hooks System:

Create an executable bash file

touch /root/lock_unlock_acct.sh
chmod +x /root/lock_unlock_acct.sh

Copy the following script to the bash file you created on Step 1.

#!/bin/bash
STAGE=$1
LOCK_PERIOD=360
LOCK_BACKUPS=1
LOCK_REASON="locked-by-hook"

ACCT=$( cat /dev/stdin  | grep -oE '"args":{[^}]*"user":"[^"]+"' | sed "s#^.*\"user\":\"\([^\"]\+\)\"#\1#g" )
#ACCT=$( cat /dev/stdin )

HOOK_LOG="/usr/local/jetapps/var/log/jetbackup5/jetbackupd.log"

if [ $STAGE = "suspend" ]; then


        ACCOUNT_ID=$( /usr/bin/jetbackup5api -F listAccounts -D "find[username]=$ACCT&find[active]=1" | grep -E '^\s*_id:' | awk '{print $2}' )

        #GET LATEST LOCK_BACKUPS NUMBER OF SNAP IDs
        sIFS=$IFS
        IFS=$'\n'
        snaps=($( /usr/bin/jetbackup5api -F listBackupForTypeName -D "name=$ACCT&account_id=$ACCOUNT_ID&contains=511&type=1&sort[created]=-1" | grep -E "^\s*parent_id:" | awk '{print $2}' ))
        snapsitems=($( /usr/bin/jetbackup5api -F listBackupForTypeName -D "name=$ACCT&account_id=$ACCOUNT_ID&contains=511&type=1&sort[created]=-1" | grep -E "^\s{6}_id:" | awk '{print $2}' ))
        IFS=$sIFS

                TOTAL_SNAPS=${#snaps[@]}
                [[ $TOTAL_SNAPS -lt $LOCK_BACKUPS ]] && LOCK_BACKUPS=$TOTAL_SNAPS

        for (( i=0; i<$LOCK_BACKUPS; i++ )); do
                #LOCK SNAP BY ID
                /usr/bin/jetbackup5api -F manageBackupLock -O json -D "_id=${snaps[$i]}&locked=1&lock_ttl=$LOCK_PERIOD"
                /usr/bin/jetbackup5api -F manageBackupNotes -O json -D "_id=${snapsitems[$i]}&notes=$LOCK_REASON"
        done
fi

if [ $STAGE = "unsuspend" ]; then
        ACCOUNT_ID=$( /usr/bin/jetbackup5api -F listAccounts -D "find[username]=$ACCT&find[active]=1" | grep -E '^\s*_id:' | awk '{print $2}' )
        #GET LOCKED SNAPS BY THE LOCK REASON AND THE ACCOUNT NAME
        sIFS=$IFS
        IFS=$'\n'
        snaps=($( /usr/bin/jetbackup5api -F listBackupForTypeName -D "name=$ACCT&account_id=$ACCOUNT_ID&contains=511&type=1&sort[created]=-1" | grep -E "^\s*parent_id:" | awk '{print $2}' ))
        snapsitems=($( /usr/bin/jetbackup5api -F listBackupForTypeName -D "name=$ACCT&account_id=$ACCOUNT_ID&contains=511&type=1&sort[created]=-1" | grep -E "^\s{6}_id:" | awk '{print $2}' ))
        IFS=$sIFS

        for (( i=0; i<$LOCK_BACKUPS; i++ )); do
                #UNLOCK SNAP BY ID
                /usr/bin/jetbackup5api -F manageBackupNotes -O json -D "_id=${snapsitems[$i]}&notes="
                /usr/bin/jetbackup5api -F manageBackupLock -O json -D "_id=${snaps[$i]}&locked=0&lock_ttl="

        done
fi

/usr/local/cpanel/bin/manage_hooks add script "/root/lock_unlock_acct.sh suspend" --manual 1 --category Whostmgr --event Accounts::suspendacct --stage post
/usr/local/cpanel/bin/manage_hooks add script "/root/lock_unlock_acct.sh unsuspend" --manual 1 --category Whostmgr --event Accounts::unsuspendacct --stage post

Linux

How to Add/Change SSL Certificates on JetBackup 5 for Linux

SSL certificates adds another layer of security when accessing your JetBackup 5 for Linux Panel by encrypting sensitive information such as your login credentials as they are sent between your server and browser.

JetBackup generates its own SSL certificate automatically upon installation.

To add your own SSL certificate, edit the JetBackup configuration file located here:

/usr/local/jetapps/etc/jetlighttpd/conf.d/jetbackup5.conf

Change the following line on the config file:

ssl.pemfile = "/usr/local/jetapps/etc/ssl/private/jetbackup5.pem"

And specify the path to your SSL certificate:

ssl.pemfile = "{SSL_CERTIFICATE_PATH}"

For SSL Certificates provided by Let's Encrypt, it is possible to assign more lines in the config file as follows:

ssl.privkey = "/PATH/TO/####.domain.net/privkey.pem"
ssl.pemfile = "/PATH/TO/####.domain.net/cert.pem"
ssl.ca-file = "/PATH/TO/####.domain.net/chain.pem"

Save the config file then restart the jetlighttpd service:

systemctl restart jetlighttpd

If using a single .pem file, the file must contain both the Private Key and Certificate with the following format:

-----BEGIN PRIVATE KEY-----
...
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----

Disk Usage/Inode Usage N/A on JetBackup 5 for Linux

Since JetBackup 5 for Linux does not have an associated panel to gather account information, JetBackup 5 must calculate these details manually. In order to do this, you must have the repquota tool installed on your linux server. For more information on how to install the repquoata tool, please visit their documentation: repquota.

Once repquota is installed and configured run the following command to verify:

repquota -a

You should get a list of all the linux users on your system along with their configured Disk Usage/Inode Usage Limits. After verifying the command works properly, restart the jetbackup5d service to resync the accounts.

/usr/bin/systemctl restart jetbackup5d

PostgreSQL - Failed to connect when assigning Databases

Some postgres installations may have authentication issues as it defaults to scram-sha-256 authentication type. You can verify if there's an authentication issue with your PostgreSQL installation when you try to assign a database with the postgres engine on JetBackup's Manage Database Plugin.

SCRAM authentication for PostgreSQL requires the libpq v10 PHP package or above installed. As a workaround, you may switch your authentication type to md5. On a PostgreSQL v13 installation for example, you need to set the following configuration files then restart the postgres service:

/var/lib/pgsql/13/data/postgresql.conf:

password_encryption = md5             # md5 or scram-sha-256

/var/lib/pgsql/13/data/pg_hba.conf:

host    all             all             127.0.0.1/32            md5
host    all             all             ::1/128                 md5
host    replication     all             127.0.0.1/32            md5
host    replication     all             ::1/128                 md5

DirectAdmin

Custom Nameserver/Hostname and Port

JetBackup 5 uses the following DirectAdmin Configurations by default when installed:

hostname (Default hostname of the server)
port (Default port for DirectAdmin 2222)

With DirectAdmin Servers it is possible to customize these two configurations. In order to load JetBackup 5 on DirectAdmin with a custom Hostname/Port please add the following lines to the JetBackup 5 DirectAdmin Configuration File located at /usr/local/jetapps/etc/jetbackup5/.da.conf

hostname=HOST/IP
port=PORT

The provided username length is too long

When restoring an account in DirectAdmin, there are instances when the account's username is longer that the default max username length set in DirectAdmin which prevents the backup from getting restored, receiving The provided username length is too long error.

To resolve this issue, please make sure that you set the appropriate size for the max_username_length parameter under the /usr/local/directadmin/conf/directadmin.conf file. (Username length setting)

Plesk

An error occurred during domain update

You may encounter the following errors when restoring an account in JetBackup:

[ERROR] Failed making utility Call to Plesk. Error: [DATE] 53340:65780abbe1688 ERR [util_exec] proc_close() failed ['/usr/local /psa/admin/bin/usermng' '--mod-user' '--old-user=example.example._naza1c1jhjo' '--new-user=example.example._naza1c1jhjo'] with exit code [255]

An error occurred during domain update: An error occurred during changing of hosting settings: System user update is failed: Unable to execute usermng: usermng: PAM password change failed: 20, Authentication token manipulation error

To resolve this issue, please check the /etc/pam.d/plesk_usrmng_encrypted file and comment out the line password required pam_deny.so. The resulting file contents should be:

#password required pam_plesk.so try_first_pass
#password required pam_deny.so
password required pam_plesk.so try_first_pass
##############################################
OR
##############################################
password required pam_plesk.so try_first_pass

NOTE: The password required pam_deny.so line does not exist on a clean installation of Plesk.

Why are forwarded/redirected domains not being backed up or listed?

Domains with Hosting Type "Forwarding" (redirected to another domain) are not listed in JetBackup as an account. Instead, they are included in the backup of the customer account (subscriber) that they are assigned to.

Please note that the forwarded domain will NOT be backed up with the domain that they are redirected to.

Feedback

Was this page helpful?

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.